syltrand

16th May 2012 16:12 UTC

Visualisation from game audio on second monitor?
Is there a way to configure the plug-in so that the input is from a program (game) audio?

I want to set up a projector as a second "monitor" and have it aimed at the ceiling to have ambient lighting, while playing a game (Diablo 3, not that it matters).

Any input would be greatly appreciated.

Warrior of the Light

17th May 2012 09:39 UTC

Not directly, no. You could use a minijack Y-cable or a mixer and return the audio to your line-in. Then, open the following URL in your playlist: linein://

It's kind of messed up but the only way that I know of to get it done.

syltrand

17th May 2012 14:03 UTC

I see.

I'll try to digital-out into the surround sound receiver and line back in the PC.

Thank you.

Yathosho

17th May 2012 15:44 UTC

there has to be a way to map the sound through software. maybe jasper's plugin is of any help?

syltrand

25th May 2012 05:44 UTC

Did it!
:down: Jasper's plugin didn't work for me (I didn't try much, felt too complicated).

:down: I also tried a program called "virtual audio cable" - but is shareware and had someone say "shareware" every 30 seconds (pretty annoying) - didn't buy it.

:up: The minijack Y splitter, on the other hand, worked like a charm - but not after some adjustments.

1. Before plugging any cables, make sure your stereo equipment is turned off since this setup can cause feedback, if not properly configured.

2. Then, you HAVE to plug in the cables for the motherboard to detect it. I was doing a 6 channel output setup (5.1 surround) so the minijack Y splitter was plugged in the "front pair" jack, and had a cable go to the line-in at rear panel.

3. Once everything is plugged-in: In Windows 7, open the recording devices, select the "line in at rear panel", properties, under the "listen" tab, check the box "listen to this device". Under the "levels" tab, bring that to around 80%. Click OK and close sound options. Open the volume mixer and lower the "Line in at rear panel" level to 0%.

4. It is now safe to turn on your stereo equipment.

5. In Winamp :winamp:, open the following URL in your playlist: linein://

Now, whatever plays through the front speakers will go back through the line-in and you will be able to enjoy visualisations with any audio streams...

Needless to say, our Diablo 3 venue was a complete success. :)

P.S. I wish i could post a picture of our setup, but it says that my 30kb .jpg is not a valid image file...?)

Warrior of the Light

25th May 2012 15:48 UTC

yeah uploading files is sometimes buggy. Most of us use imageshack.us

Great to hear it worked out. I still wish this could be done through software. After reading around a bit I suspect it could have something to do with preventing copyright infringement.

syltrand

26th May 2012 00:35 UTC

diablo 3 venue
here's the photo!

those are 52" tv's.